10 Improvement Tips For Concrete Mixers

Concrete mixers are usually equated with time and labour-intensive jobs. These tools are often found in construction sites, with large piles of building materials and people in hard hats scurrying about.

But even simple tasks may benefit from the use of a concrete mixer. Whether you have to pave a little driveway or enlarge your residence, using a concrete mixer can surely accelerate the construction process. Individuals no longer need to devote a great deal of power and time to mixing concrete. Even modest, simple tasks can benefit from using mixers.

Concrete mixers are usually equated with time and labour-intensive jobs. These tools are often found in construction sites, with large piles of building materials and people in hard hats scurrying about.

But even simple tasks may benefit from the use of a concrete mixer. Whether you have to pave a little driveway or enlarge your residence, using a concrete mixer can surely accelerate the construction process. Individuals no longer need to devote a great deal of power and time to mixing concrete. Even modest, simple tasks can benefit from using mixers.

Whether you are a newcomer to cement or an experienced construction professional, knowing a few of these methods of utilizing a mixer can do a lot in improving efficiency and productivity in the worksite.

1. Prep the worksite

The first thing you should do is to prepare the worksite for concrete pouring. Nearly all the work includes manual tasks such as positioning the pour, cordoning it off, and hammering the ground to a level grade. Apply for your requisite licenses prior to beginning the job.

2. Wear appropriate safety equipment

Be certain that you and other employees wear personal protective equipment before working on the cement mixer. Standard safety equipment includes a respirator, goggles, work gloves, and boots. The respirator and the gloves are particularly important since powdered concrete is poisonous and also the dust may burn your own eyes and palms.

3. Keep it shut

Concrete hardens right away, so be certain that you place the mixer as close to the work site as you can. Shorter travel times means easier transportation, more excursions at shorter periods, and less exhaustion from the hefty load.

4. Inspect the mixer

Inspect carefully the mixer’s components before it is switched on, during usage, and as soon as it’s shut down. Make sure the mixer blades are not bent. A fast check can help save a great deal of effort and money later on.

5. Coat the surface

Apply a thin coating of industrial oil on the outside of the mixer to prevent cement collecting and hardening on the surface. You may also add a light coat of gas in the drum before blending.

This prevents the cement from sticking to the surface of the inside. However, use diesel because regular petrol changes the concrete mixture, changing its own consistency.

6. Position on stable flooring

Position the concrete mixer on a stable, horizontal surface, instead of irregular or sloping floor. Even if the surface is coated, be certain that you put a rigid hardboard or something similar under the mixer to guarantee stability and to avoid accidental spillage.

7. Keep the engine clean

Concrete mixers should only be used outdoors, and all the dust flying around can get to the mixer’s motor. Use an air compressor to dislodge cement and dust that may have gathered in the engine.

A clean motor works optimally and economically. In addition, you spend less expensive repairs.

8. Grease the gears

All that turning and mixing wet cement within the drum will wear the gears and pulleys down. Regularly grease the gears, pulleys and other moving joints to counteract the strain caused by friction. Not only will your mixer’s lifespan become more, but its performance will remain at the best level.

9. Drain the drum

Immediately drain the drum of concrete once it stops turning. You should not wait until the last time to pour out the concrete, or it may harden and become impossible to eliminate. Do not use the drum to stay mixed concrete.

10. Wash the mixer following usage

Gently wash out the cement mixer following use. This is a safe and affordable method of washing out the mixer and does not involve using abrasive chemicals.

Leave a mixture of two scoops of gravel combined with three gallons of water for 15 to 25 minutes to guarantee the best outcome. Don’t forget to fix the drum angle to ensure all nooks and crannies are attained.

Leave a Reply